Connector lay-out, Lower side, Connector lay-out – lower side – 2N BRI Lite/Enterprise v1.1 User Manual
Page 19: Before you start 2.1
Before You Start
2.1
19
Connector Lay-Out
– Lower Side
The following connectors are available on the BRI gateway bottom:
Connector type
BRI Lite
BRI Enterprise
DC Jack 2.1mm supply connector
YES
YES
10/100BaseT Ethernet connector
YES
YES
ISDN BRI TE interface
NO
YES
ISDN BRI NT interface
NO
YES
ISDN BRI NT/TE interface
YES
NO
Caution
2N
®
BRI Lite has two RJ45 connectors, which, however, are cross-
connected into one ISDN BRI. Be sure to connect just one ISDN BRI line to
make the system work properly. Which of the RJ45 connectors will be used
depends on the type of the equipment to be connected (NT/TE) and the
interconnecting cable (cross/straight).
Supply connector
SIM 1 and SIM 2
10/100BaseT
ISDN BRI NT/TE (Lite)
ISDN BRI NT a TE (Enterprise)
RESET button