2N BRI Lite/Enterprise v1.1 - Manual (Page 78)

78
Login configuration
Use this window to set the access password and name for the 2N BRI gateway
web interface. Use the same access data for Telnet connection too.
Caution
 Change the user name and password during your first gateway
configuration to avoid unauthorised access to your gateway configuration!
Web configuration
Set additional parameters for web access to the GSM gateway.
 Auto logout – set the count of minutes in which the user will be logged out
automatically.
 Enable web session lock – one Admin user may be connected to the GSM
gateway at one time. If another duly authorised user tries to log in, the
preceding session will be terminated automatically. If you activate this
function, no automatic logout will occur and any other access attempts will be
blocked.
 Simple login form – activate this item to change the graphic appearance of
the login window into an anonymous look. This function is recommended for
direct connection of the GSM gateway to the Internet.
 Use SMS user for SMS operations on the web – enable/disable a user
authorised to send/receive SMS messages only.
 SMS user name/password – connect a user with the right to receive/send SMS
only.
Report configuration
Use the window to set details for automatic tracing generated by the GSM
gateway.
Configuration backup
Configuration download
Use this window to download the current BRI gateway configuration. The saved
file has the following format: CFG-M202-gateway_serial_number-rrrrmmdd-
hhmmss.tar
Configuration upload
Use this window to upload new configuration to the BRI gateway. The Ethernet
interface values and access data remain unchanged!
Warning
 Upload a well-known configuration file intended for the selected GSM
gateway to avoid GSM gateway error and subsequent factory restart.