2N BRI Lite/Enterprise v1.1 - Manual (Page 28)

Brief Installation Guide 2.2
28
Warning
 Connecting a defective or inappropriate power supply adapter may lead to
a temporary or permanent 2N ® BRI Enterprise / BRI Lite error!
 Check whether the antenna is connected before plugging the adapter.
Feeding the device without antenna connection may result in the
GSM module transmitter damage.
Ethernet Cable Connection
To connect 2N ® BRI Enterprise/Lite into the Ethernet network, use a standard straight
cable terminated with RJ-45 connectors (included in the package). The GSM gateway
supports the 10BaseT and 100BaseT standards, the Ethernet connection status is
indicated by the status LED indicators located on the RJ-45 connector (refer to p. 20
for details).
Caution
 The Ethernet interface is used for remote supervision and configuration
only, i.e. does not contain the VoIP interface.
 With a proper licence, the device provides the VoIP-SIP support.