2N BRI Lite/Enterprise v1.1 - Manual (Page 85)

List of Terminal AT Commands 6.3
85
System Settings
%S85=sms ...no answer sms text (max 63 chars)
%S90=mode ...operating mode of GSM module allocation
(0=cyclic mode, 1=locked mode, 2=smart mode - according to
already called minutes)
(for 0 and 2 set LCR group = 3 (any))
%S91=buf,id ...cdr mode (b0=outg, b1=inc, b2=failed, b3=moninfo)
unit id (0=off, 1..255)
%S92=rep ...report mode (b0=states, b1=tstamp, b2=smp,
b3=lay2, b4=select)
%S98=pin ...sim pin (max 7 digits)
%S99=dd.mm.yy.w/hh:mm:ss ...set date/time (w=1..7 day of week)
%X10=tsec ...external routing tout in sec/10 (5..60,255)
%X20=mmdd,mmdd ...date of hour+1,hour-1 time change (0=off,0101..1231)
%X22=hh:mm ...0:01..23:59 – time of reset of GSM gateway, 0:00 - no reset
%X80=login/pass ...login name / password (max 15 chars all)
System Control
AT&Gxx=RESET Reset of GSM module No xx
AT&Gxx=BLOCK Block of GSM module No xx
AT&Gxx=DOWN Transfer of GSM module into the sleep mode
AT&Gxx=ON Transfer of GSM module into the idle mode
ISDN Settings
%I00=xxx ...pri1 protocol/mode:
NT,TE,NT/S,NTNT (pri2 = TE,NT,SY,NT)
For FW:2_03_15 only NT and NT/S (sync received from TE port)
%I01=tei,mtp tei,mtp = 0..63,0 ….fixed tei,ptp
tei,mtp = 64,0 ….dynamic tei,ptp
tei,mtp = 64,1 ....fixed tei,mtp
%I05=c1,c2,c3,c4 ...cause codes for failed calls
c1=dial timeout (TIMEOUT=120)
c2=dis.prefix (REJECT=21)