2N BRI Lite/Enterprise v1.1 - Manual (Page 95)

Call Data Records (CDR) 6.6
95
L: undef.frame Received unknown type packed
M: (I field) Received wrong I-packet (numbered packet)
N: frame size Received packed with wrong length
O: N201 error Value N201 was exceeded (max. length of packet)
L3-ERR tout sts # (p##) Error of 3. layer isdn: timeout in status # on channel
p##
G2-ERR ATD/ERROR init (g##) Error of 2. layer isdn: restart of module g## after
rejected command ATD by GSM network
GSM Cause 150 (g##) Error of 2. layer isdn: restart of module g## after cause
150 was received (call barred by GSM network)
G3-ERR tout sts # (g##) Error of 3. layer isdn: timeout in status # on module
g##
C4-ERR tout sts # (p##/g##) Error of 4. connecting layer: timeout in status # on call
between channel p## and GSM module g##
6.6 Call Data Records (CDR)
** 18.08.10/15:55:17 O-OK CAU-016 p01/g00 GRP-31 0:17 000:13 00000.00
720155732 1111 1/230030025526624
Column 1 - **
Column 2 – call date and time
Column 3 – call status

I-FD : failed incoming call

I-OK : successfully connected incoming call

O-FD : failed outgoing call

O-OK : successfully connected outgoing call
Column 4 – release cause sent to ISDN
Column 5 – used B-channel number / used GSM module
Column 6 – used GSM group (C=CallBack)
Column 7 – connection time
Column 8 – call duration mmm:ss (max. 255:59), or error cause for unconnected call
Column 9 – call cost (to be implemented in higher firmware versions) / gateway ID
(optional)
Column 10 – called party number (CDN)
Column 11 – calling party number (CGN)
Column 12 – SIM card slot number / SIM card IMSI or SCID (Siemens GSM modules only)