2N BRI Lite/Enterprise v1.1 - Manual (Page 75)

75
+ +420261301500 Add + before CLIP
00 00420261301500 Add 00 before CLIP
-- 0261301500 First two digits removed from CLIP
---99 99261301500 First three digits removed from CLIP, prefix 99
added
 Looping of voice message – set the voice message playing time.
Send CLIP from GSM/UMTS to VoIP
 Transfer CLIP from GSM/UMTS – enable/disable the function.
 Separating char – set the separator for the SIM card CLIP and ID of the
extension to be called.
 Modify – modify the extension ID.
Caution
 The Send CLIP from VoIP to GSM service must be supported by the
GSM/UMTS provider‟s network. Otherwise, the call may be rejected by
GSM/UMTS.
Others
 Time to keep CLIP in table – set the record keeping time for AutoCLIP routing.
 Add record only for unconnected call – enable storing of unconnected
outgoing calls in the AutoCLIP table only.
 Delete record for connected answer – enable deletion of an AutoCLIP record in
the case of successful CallBack.
 Skip DTMF for numbers not in CLIP Routing table – enable this option to set
DTMF to the incoming calls only whose CLIP is included in the CLIP Routing
table.
 Skip list of called numbers after failed call to wanted number – enable this
function to disable forwarding of incoming calls to the numbers included in the
List of called numbers if rejected after DTMF.
 Auto end to CallBack request – enable that the incoming call whose CLIP
meets the CallBack settings will be rejected. If not, the call will be ignored.
The CallBack function will be retrieved after call end in both the cases.
List of called numbers
List of numbers to be dialled if DTMF dial-in was not made.
Prefixes
Use this window to adapt the gateway to calling to various GSM providers‟
networks. Set the call routing rules based on prefixes for up to eight groups.
Prefix list 1-8
Eight prefix groups to be assigned in the LCR table.