AirLive RS-1000 - Manual (Page 105)

１００
Adding a new Outgoing Policy
Click on the New Entry button and the Add New Policy window will appear.
Figure7-2 Add a new Outgoing Policy
Source Address: Select the name of the LAN network from the drop down list. The drop
down list contains the names of all LAN networks defined in the LAN section of the Address
menu. To create a new source address, please go to the LAN section under the Address
menu.
Destination Address: Select the name of the WANnetwork from the drop down list. The drop
down list contains the names of all WANnetworks defined in the WANsection of the Address
window. To create a new destination address, please go to the WANsection under the
Address menu.
Service: Specified services provided by WANnetwork servers. These are
srvices/application that are allowed to pass from the LAN network to the WANnetwork.
Choose ANY for all services.
Action: Select Permit or Deny from the drop down list to allow or reject the packets travelling
between the source network and the destination network.
Logging: Select Enable to enable flow monitoring.
Statistics: Select Enable to enable flow statistics.
Schedule: Select the pre-defined schedule name from the pull-up menu. The policy will be
executed in the specific time slot automatically.