AirLive RS-1000 - Manual (Page 108)

１０３
Schedule: Select the item listed in the schedule to enable the policy to automatically execute
the function in a certain time and range.
Alarm Threshold: To set the maximum value of transmitting and receiving packet, enter the
number based on the unit（KBytes/Sec）
QoS: To determine if the QoS function can work in this Policy function.
Click OK to execute the new setting or click Cancel to discard changes.
If you want to change or add new items in the pull-down menu, go to the corresponding
chapter for setup.
Source Address: LAN of Address menu
Destination Address: WAN of Address menu