AirLive RS-1000 - Manual (Page 40)

３５
Enabling DHCP Support
Step 1.
In the Dynamic IP Address window, click Enable DHCP Support.
Domain Name: The Administrator may enter the name of the LAN network domain if
preferred.
DNS Server 1 : Enter the distributed IP address of DNS Server1.
DNS Server 2 : Enter the distributed IP address of DNS Server2.
WINS Server 1 : Enter the distributed IP address of WINS Server1.
WINS Server 2 : Enter the distributed IP address of WINS Server2.
Client IP Address Range 1: Enter the starting and the ending IP address
dynamically assigning to DHCP clients.
Client IP Address Range 2: Enter the starting and the ending IP address
dynamically assigning to DHCP clients. (Optional)
Step 2.
Click OK to enable DHCP support.
Figure1-30 Enable DHCP Support