AirLive RS-1000 - Manual (Page 35)

３０
Route Table
In this section, the Administrator can add static routes for the networks.
Entering the Route Table screen
Step 1.
Click System on the left side menu bar, then click Route Table below it. The
Route Table window appears, in which current route settings are shown.
Figure1-25 Route Table
Route Table functions
" Interface: Destination network , LAN or WAN 1 networks.
" Destination IP: IP address of destination network.
" NetMask: Netmask of destination network.
" Gateway: Gateway IP address for connecting to destination network.
" Configure: Change settings in the route table.
!!