AirLive RS-1000 - Manual (Page 72)

６７
WAN Group
Entering the WAN Group window
Step 1.
Click the WAN Group under the Address menu bar to enter the WAN window.
The current settings for the WAN network group(s) will appear on the screen.
Figure3-13 WAN Group
Definitions:
Name: Name of the WAN group.
Member: Members of the group.
Configure: Configure the settings of WAN group. Click Modify to change the parameters of
WAN group Click Remove to delete the selected group
.
In the WAN Group window, if one of the members has been added to the Policy, “In
Use” message will appear in the Configure column. You are not allowed to modify or remove
the settings. Go to the Policy window to remove the setting, and then you can configure.
!!