AirLive RS-1000 - Manual (Page 193)

188
Install a server inside the LAN network, open to all the IP addresses including LAN and WAN
IPs to use QoS to attain the maximum downstream and upstream bandwidth. The setup
orders should be QoS, Virtual Server and then Policy.
Step 1.
Enter the QoS window in the menu bar on the left hand side of the window.
Step 2.
Click the New Entry button.
Step 3.
In the Add New QoS window, enter each parameter.
Step 4.
Click OK.
Step 5.
When the following screen appears, the QoS setup is completed.
Step 6.
Go to the Virtual server 1 window under the Virtual server menu.
Step 7.
Click the Click here to configure button.