AirLive RS-1000 - Manual (Page 78)

７３
Custom
Entering the Custom window
Step 1.
Click Custom under it. A window will appear with a table showing all services
currently defined by the Administrator.
Figure4-2 Custom Service
Definitions:
Service name: The defined service name.
Protocol: Network protocol used in the basic setting. Such as TCP、UDP or others.
Client port: The range of Client port in defined service.
If the number of ports entered in the two fields of Client port is different, it means that the port
numbers between these two numbers are opened. If the number of ports entered in the two
fields of Client port is identical, it means that the entered port number is opened.
Service port: The range of Service port in defined service.
If the number of ports entered in the two fields of Service port is different, it means that the
port numbers between these two numbers are opened. If the number of ports entered in the
two fields of Service port is identical, it means that the entered port number is opened.
Configure: Configure the settings in Service table. Click Modify to change the parameters in
Service table. Click Remove to delete the selected setting.
Note: In the Custom window, if one of the services has been added to Policy or Group, ”In
!!