AirLive RS-1000 - Manual (Page 54)

４９
For Dynamic IP Address (Cable Modem User): This option is for users who are
automatically assigned an IP address by their ISP, such as cable modem users. The
following fields apply:
IP Address: The dynamic IP address obtained by the Firewall from the ISP will be displayed
here. This is the IP address of the External (WAN) port of the Security
Bandwidth Manager.
MAC Address: This is the MAC Address of the Security Bandwidth Manager.
User Name (Some ISPs may require)：This is provided by your ISP.
Hostname: This will be the name assign to the Security Bandwidth Manager. Some cable
modem ISP assign a specific hostname in order to connect to their network. Please enter
the hostname here. If not required by your ISP, you do not have to enter a hostname.
Max. Upstream/Downstream Bandwidth: The bandwidth provided by ISP.
(Upstream/Downstream can be up to 10Mbps)
Renew: Requests for receiving the new WAN IP address.
Release: Requests for releasing the obtained WAN IP address.
Ping: Select this to allow the external network to ping the IP Address of the Firewall. This
will allow people from the Internet to be able to ping the Firewall. If set to enable, the
Security
Bandwidth Manager will respond to echo request packets from the external network.
WebUI: Select this to allow the Security Bandwidth Manager WEBUI to be accessed from the
External (WAN) network. This will allow the WebUI to be configured from a user on the
Internet. Keep in mind that the Security
Bandwidth Manager always requires a username
and password to enter the WebUI.