AirLive RS-1000 - Manual (Page 127)

１２２
Mapped IP
Internal private IP addresses are translated through NAT (Network Address Translation). If a
server is located in the LAN network, it has a private IP address, and outside users cannot
connect directly to LAN servers’ private IP address. To connect to a LAN network server,
outside users have to first connect to a real IP address of the WAN network, and the real IP is
translated to a private IP of the LAN network. Mapped IP and Virtual Server are the two
methods to translate the real IP into private IP. Mapped IP maps IP in one-to-one fashion;
that means, all services of one real WANIP address is mapped to one private LAN IP address.
Entering the Mapped IP window
Step 1.
Click Mapped IP under the Virtual Server menu bar and the Mapped IP
configuration window will appear.
Figure9-1 Mapped IP
Definition:
External IP：WAN IP Address.
Map to Virtual IP：The IP address which WAN maps to the virtual network in the server.
Configure：To change the setting, click Configure to modify the parameters; click delete to
delete the setting.
!!