AirLive RS-1000 - Manual (Page 58)

５３
For PPTP (European User Only): This option is for PPTP users who are required to enter a
username and password in order to connect, especially for European Users.
Current Status: Displays the current line status of the PPTP connection.
IP Address: Displays the IP Address of the PPTP connection
Username: Enter the PPTP username provided by the ISP.
Password: Enter the PPTP password provided by the ISP.
Local IP: Select To obtain an IP address automatically or Use the following IP address.
MAC Address: This is the MAC Address of the Bandwidth Manager.
Hostname: This will be the name assign to the Bandwidth Manager. Please enter the
hostname here. If not required by your ISP, you do not have to enter a hostname.
Domain Name: This will be the domain name assign to the Bandwidth Manager.
IP Address: Enter the IP address assigned to you by your ISP. This will be the public IP
address of the External (WAN) port of the Bandwidth Manager.
Netmask: This will be the Netmask of the external (WAN) network. (i.e. 255.255.255.0)
Default Gateway: This will be the Gateway IP address.
PPTP Gateway: This will be the PPTP Server IP address.
Connect ID: Enter the phone number that provided and asked by some ISP. (Optional)
Max. Upstream/Downstream Bandwidth: The bandwidth provided by ISP.
(Upstream/Downstream can be up to 10Mbps)
BEZEQ-ISRAEL: The selection especially for the user who wants to connect to Bezeq (the
Israeli phone company which doesn’t conform to the RFC protocol).
Service-On-Demand:
Auto Disconnect: The PPTP connection will automatically disconnect after a length of idle
time (no activities). Enter in the amount of idle minutes before disconnection. Enter ‘0’ if
you do not want the PPTP connection to disconnect at all.