AirLive RS-1000 - Manual (Page 21)

１６
Date/Time
Synchronizing the Bandwidth Manager with the System Clock
Admins can configure the Security Bandwidth Manager.s date and time by either
syncing to an Internet Network Time Server (NTP) or by syncing to your computer.s
clock.
Follow these steps to sync to an Internet Time Server
Step 1. Enable synchronization by checking the box
.
Step 2. Click the down arrow to select the offset time from GMT.
Step 3. Enter the Server IP Address or Server name with which you want to
synchronize.
Step 4. Update system clock every 5 minutes You can set the interval
time to synchronize with outside servers. If you set it to 0, it means
the device will not synchronize automatically.
Follow this step to sync to your computer’s clock.
Step 1. Click on the Sync button.
Click OK to apply the setting or click Cancel to discard changes.
Figure1-14 System Time