AirLive RS-1000 - Manual (Page 56)

５１
For Static IP Address: This option is for users who are assigned a static IP Address from
their ISP. Your ISP will provide all the information needed for this section such as IP Address,
Netmask, Gateway, and DNS. Use this option if you have more than one public IP Address
assigned to you.
IP Address: Enter the static IP address assigned to you by your ISP. This will be the public
IP address of the External (WAN) port of the Security
Bandwidth Manager.
Netmask: This will be the Netmask of the external (WAN) network. (i.e. 255.255.255.0)
Default Gateway: This will be the Gateway IP address.
DNS Server 1/2: Enter the DNS 1/2 server provided by ISP. (See
Note.)
Max. Upstream Bandwidth/Max. Downstream Bandwidth: The bandwidth provided by ISP.
(Upstream/Downstream can be up to 10Mbps)
Ping: Select this to allow the external network to ping the IP Address of the Firewall. This
will allow people from the Internet to be able to ping the Firewall. If set to enable, the
Security
Bandwidth Manager will respond to echo request packets from the external network.
WebUI: Select this to allow the Security Bandwidth Manager WEBUI to be accessed from the
External (WAN) network. This will allow the WebUI to be configured from a user on the
Internet. Keep in mind that the Security
Bandwidth Manager always requires a username
and password to enter the WebUI.
After setting all of the interface address, click OK button.
Figure2-4 WAN interface setup for Static IP Address
!!