AirLive RS-1000 - Manual (Page 59)

５４
Address
The
Security Bandwidth Manager allows the Administrator to set Interface addresses of the
LAN network, LAN network group, WAN network, WAN group.
What is the Address Table?
An IP address in the Address Table can be an address of a computer or a sub network. The
Administrator can assign an easily recognized name to an IP address. Based on the network
it belongs to, an IP address can be an LAN IP address, WAN IP address . If the Administrator
needs to create a control policy for packets of different IP addresses, he can first add a new
group in the LAN Network Group or the WAN Network Group and assign those IP
addresses into the newly created group. Using group addresses can greatly simplify the
process of building control policies.
With easily recognized names of IP addresses and names of address groups shown in the
address table, the Administrator can use these names as the source address or destination
address of control policies. The address table should be built before creating control policies,
so that the Administrator can pick the names of correct IP addresses from the address table
when setting up control policies.
How to use Address Table
With easily recognized names of IP addresses and names of address groups shown in the
address table, the Administrator can use these names as the source address or destination
address of control policies. The address table should be built before creating control policies,
so that the Administrator can pick the names of correct IP addresses from the address table
when setting up control policies.