Software setup – Atop Technology SE5002D User manual User Manual
Page 20
Advertising
![background image](/manuals/554962/20/background.png)
Atop Serial Device Server
SE5002D
User Manual V. 1.1
3. Software Setup
SE5002D Serial device server is shipped with default settings shown in the following table.
Table 3. 1
Property
Default Value
IP Address
10.0.50.100
Gateway
10.0.0.254
Subnet Mask
255.255.0.0
User Name
Admin
Password
Null (leave it blank)
COM 1
9600, None, 8,1, No flow control, buffer disabled, packet delimiter timer 2ms
Link 1
Type: TCP Server, Listen port4660, Filter=0.0.0.0, Virtual COM disabled
SysName of SNMP
Name
SysLocation of SNMP
Location
SysContact of SNMP
Contact
Advertising