Atop Technology SE5002D User manual - Manual (Page 77)

Atop Serial Device Server
SE5002D
User Manual V. 1.1
4.5 Serial/IP Advanced Settings
In the Serial/IP Control Panel, Click on the Advanced button to open Advanced Settings
window, Fig. 4. 16 . Click on Use Default Settings to load the default settings.
Fig. 4. 16
 Extend Server Connection; maintains the TCP connection for a specified amount of
time after the COM port is closed.
 Attempt Server Connection; terminates pending connection attempts if they do not
succeed in a specified amount of time.
 Synchronize with Server Upon COM Port Open; required by NT Systems (2000, XP,
Vista, 7).
 Update Routing Table Upon COM Port Open; maintains IP route to a server in a
different subnet by modifying the IP routing table.
 Enable Nagle Algorithm; provides better network efficiency by imposing a minor latency
on the data stream while it waits to fill network packets.
 Always Limit Data Rate to COM Port Baud Rate; limits the data rate to the baud rate