Atop Technology SE5002D User manual - Manual (Page 84)

Atop Serial Device Server
SE5002D
User Manual V. 1.1
Appendix
Upgrade System Firmware
Firmware is available for download from our Atop website. Subscribe to our RSS System to
receive our latest firmware update automatically.
Upgrade Procedures
This section introduces the command line firmware upgrade utility included in the CD.
Alternatively, use the GUI management utility Serial Manager to upgrade the system firmware.
Refer to Serial Manager ’s manual to use Serial Manager to upgrade the system firmware.
After the new firmware is downloaded, follow the procedures below to upgrade SE5002D.
 Connect a PC (Windows) and the SE5002D to the same subnet. Use ping command or
the Serial Manager utility to verify its availability.
 Locate dapdl.cfg (configuration file), gwdl.exe (download executable utility), and
download.bat (download batch file) in the \SE5001A\Download_Tool folder in the CD.
Copy all these mentioned files to the system disk.
 Locate the new system kernel and/or AP firmware to download. Move them inside the
copied directory.
 Double click on download.bat to start the firmware upgrade process.
Fig. 1
Note: it is also possible to edit dapdl.cfg and run gwdl.exe manually without using the batch file download.bat.