Atop Technology SE5002D User manual - Manual (Page 29)

Atop Serial Device Server
SE5002D
User Manual V. 1.1
3.2.7 Configure SE5002D as a UDP
UDP is a connectionless protocol. It is faster than TCP, but does not guarantee packet delivery
to the remote host. The following figure ( Fig. 3. 9 ), shows how to setup UDP.
Fig. 3. 9
 Type 3 in the “Input choice (1~5) and enter:”
 Input SE5002D’s local listening port in the “Please input local port:”
 Input remote device’s IP in the “Please input Destination IP:”
 Input remote device’s listening port in the “Please input Destination port:”