Caution – Atop Technology SE5002D User manual User Manual
Page 8
Atop Serial Device Server
SE5002D
User Manual V. 1.1
FCC WARNING
Class A for Serial Device Server (Model SE5002D)
This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment uses, generates and radiates radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
A shielded-type power cord is required in order to meet FCC emission limits and also to
prevent interference to the nearby radio and television reception. It is essential that only the
supplied power cord be used.
Use only shielded cables to connect other devices to this equipment by RS-232 or RS-485
ports.
Be cautioned that changes or modifications not expressly approved by the party responsible
for compliance could void ones’ authority to operate the equipment.
Caution
Beginning from here there will be extreme caution exercised.
Never install or work on electrical or cabling during periods of lighting activity.
Never connect or disconnect power when hazardous gases are present.
WARNING: Disconnect the power and allow to cool 5 minutes before
touching.