Diagnostics, Using standard ping command – Atop Technology SE5002D User manual User Manual
Page 80
Advertising
Atop Serial Device Server
SE5002D
User Manual V. 1.1
5. Diagnostics
There are several ways to check the status and availability of a serial device server.
Using Standard ping Command
From the Windows Start menu, select Run and type in
“ping<TCP Server IP address>”. If
the serial device server can receive ping requests sent from the host, it will reply to the ping
message,
. If the ping request cannot reach the serial device server, a timed out
Fig. 5. 1
Fig. 5. 2
Advertising