1 com configuration, Com configuration, Fig. 3. 35 – Atop Technology SE5002D User manual User Manual
Page 60
Advertising
Atop Serial Device Server
SE5002D
User Manual V. 1.1
3.7.1 COM Configuration
Configure serial settings in this page,
. Note that these settings need to match the
ones in the serial device.
Fig. 3. 35
Alias Name, this field is for identification purposes only.
Baud Rate, Select one of the baudrates from the dropdown box, or select
“Other” and
then enter the desired baudrate in the input box. Baudrates higher than 230400bps are
not supported.
Parity/Data Bits/Stop Bits, configure them accordingly.
Advertising