12 setting packet delimiter, Setting packet delimiter, Fig. 3. 14 – Atop Technology SE5002D User manual User Manual
Page 34
Advertising
![background image](/manuals/554962/34/background.png)
Atop Serial Device Server
SE5002D
User Manual V. 1.1
3.2.12 Setting Packet Delimiter
Packet delimiter is a way for packaging serial data. It can prevent serial data from being
truncated by packaging them in the same Ethernet packet. SE5002D provides two kinds of
packet delimiter: Timer and Character. The default value for the timer is 2 ms (0 ms to disable
this function). This means that if SE5002D does not receive new serial data within 2 ms, it will
send out all the serial data in buffer in one packet over Ethernet. The way to change the
delimiter timer is shown in the following figure,
Fig. 3. 14
Advertising