2 running serial/ip in windows, Running serial/ip in windows, Fig. 4. 3 – Atop Technology SE5002D User manual User Manual
Page 65: Fig. 4. 4
Advertising
Atop Serial Device Server
SE5002D
User Manual V. 1.1
4.2.2 Running Serial/IP in Windows
Find the Serial/IP Control Panel from:
Start→All programs→Serial/IP→Control Panel
In the Windows Control Panel, open the Serial/IP applet.
In the Windows notification area,
, right click on the Serial/IP tray icon and
click on Configure to open the Control Panel
Fig. 4. 3
If no Virtual COM port is selected, a dialog will pop up and ask to select at least one port as the
Virtual COM port before proceeding,
Fig. 4. 4
Advertising