Fig. 3. 2 – Atop Technology SE5002D User manual User Manual
Page 22
Advertising
Atop Serial Device Server
SE5002D
User Manual V. 1.1
After verifying the password, the following terminal screen appears,
Fig. 3. 2
Note:
1.
If SE5002D does not receive any commands within 1 minute, Telnet connection will terminate
automatically.
2.
After “0.Exit” is selected; the console will ask the user to save the configurations.
3.
Changes to networking parameters will take effect only once SE5002D is restarted.
Advertising