Atop Technology SE5002D User manual - Manual (Page 68)

Atop Serial Device Server
SE5002D
User Manual V. 1.1
 Enable Restore Failed Connections to force Virtual COM to automatically restore failed
connections with the serial device server in the case of unstable network connections.
 To test the Virtual COM connections, click the Configuration Wizard button and then click
on Start button in the pop up window, Fig. If the test passes, all checks should b in green.
To apply the changes in the Configuration Wizard window to the Control Panel, click on
Use Settings. Click on Copy to copy the results to the system clipboard.
 To transfer the settings between Virtual COM ports, click on the Copy Settings To
button.
Fig. 4. 7