CHAMPION USN72 - Manual (Page 186)

2
Table Limit Switch (TLS) Installation Instructions
Additional Parts and Special Tools Needed:
Qty. P/N Description
A/R* Flexible nonmetallic liquid tight 1/2" conduit
A/R* #14 gauge wire (2 conductors)
A/R* Cable ties
4
#6 stud size spade terminals
1 Straight 1/2" liquid tight conduit fitting
1 Elbow, 90º 1/2" liquid tight conduit fitting
1 7/8" Knock-out punch capable of cutting stainless steel
* Exact lengths and quantities depend on length of dish table and conduit routing.
Kit Contents: This kit contains the following parts.
Qty. P/N Description
1
330764 Bracket, Table Limit Switch
1 114247 TLS Body w/contact block
1 114248 TLS Actuator 90º Head
1 114249 TLS Clamp and Rod
1 114250 TLS Sealtite Gland, 1/2"
1 114251 TLS Nylon Rod, 6mm x 12" Lg.
2 114004 Screw, 10-32 x 1/4" Slotted Hex Hd.
2 100007 Screw, 10-32 x 3/8" Truss Hd.
1 111167 Paper Template for marking holes
1 900947 Instruction Sheet
Note:
Contact your parts supplier if any parts are missing
from this kit.
Section 2: Parts and Special Tools