CHAMPION USN72 - Manual (Page 38)

BOOSTER
LOW TEMP
OFF
START STOP
ON POWER ON
20
Part 3: OPERATION
3.2 Description of Operator Controls and Indicators
3.2.1 Remote Control Cabinet
Refer to Figure 3.1 and Table 3.1 below for the location and function of the operator controls and indica-
tors on the remote control cabinet.
Figure 3.1
Operator Controls
Remote Control Cabinet
(Front Exterior View)
ON/OFF Switch Selector Controls power to the
dishwasher.
Connects power to
tank and booster
heat circuits, pump
contactors, and drive
contactor.
Power ON light Red pilot Signals control power
connected to unit if
ON/OFF selector ON.
Start switch Green Starts pumps and
Pushbutton conveyor motors.
Stop switch Red Stops pumps and
pushbutton conveyor motors.
Booster low Red pilot Indicates final rinse
temperature light light temperature has
fallen below 180 ° F.
Dishwasher stops.
Final rinse water Green Prime final rinse water
prime button pushbutton temperature to reach
180 ° F and above when
the above function has
indicated booster low
temperature.
Table 3.1
Controls and Indicators
Remote Control Cabinet
2
1
3
4
5
CONTROL TYPE FUNCTION
1
2
3
4
5
6
6