Comelit MT VCS 01 User Manual

Page 49

Advertising
background image

48

V5/02E Impianto con due posti
esterni audio-video serie Logicom.
Cablaggio semplificato

Funzionamento
Il funzionamento dell'impianto base è
descritto a pag. 44.
L’impianto inoltre permette la
comunicazione audio-video con il
posto esterno dal quale è stata
effettuata la chiamata grazie allo
scambio art. 4861.

Realizzazione dell'impianto
• Eseguire l'installazione seguendo

le "Norme generali per l'installa-
zione", con particolare riferimento
alla sezione e al tipo dei condutto-
ri. Vedi a pag. 36.

• Per le varianti consultare il capito-

lo "Varianti agli schemi d'impianto"
a pag. 66.

• Collaudare l'impianto come

descritto a pag. 39.

Apparecchiature necessarie:
n

Monitor a scelta fra gli artt.
4600W - 4600W/I - 4601W ed
eventuali scatole da incasso

n

staffe art. 4606W

n

Derivatori video art. 4835
(4 moduli DIN) 1 per ogni 4 o
frazione di 4 monitor

2

Trasformatori art. 1112
(5 moduli DIN)

1

Trasformatore art. 1195
(5 moduli DIN)

1

Centrale video art. 4856
(8 moduli DIN)

1

Scambio art. 4861
(8 moduli DIN)

2

Posti esterni Logicom (vedi
esempi a pag. 10)

2

Elettroserrature a scelta fra gli
artt. 1152-57-60-63.

N.B. Se ogni posto esterno utilizza più
di 2 lampade di illuminazione
portanomi aggiungere un
trasformatore art. 1112 (5 moduli DIN)
e due conduttori all'impianto per
l'alimentazione delle ulteriori lampade.
Vedi variante V5/EA a pag. 66.

V5/02E System with two Logicom
audio-video external units.
Simplified cabling

Operation
Operation of the system is described
on page 44.
It also gives audio-video
communication with the external unit
from which the call was made thanks
to the automatic switching device art.
4861.

Construction of the system
• Construct the system by following

the "General indications for instal-
lation" with particular attention to
the cross-section and type of the
conductors. See page 36.

• For variants, please see the

"Variations of system diagrams "
section on page 66.

• Test the system as described on

page 39.

Equipment required:
n

Monitor to be selected from among
arts. 4600W – 4600W/I and 4601W
and any flush-mounted boxes

n

Brackets art. 4606W

n

Video distribution amplifiers
art. 4835 (4 DIN modules) 1 for
every 4 or fraction of 4 monitors

2

Trasformers art. 1112
(5 DIN modules)

1

Transformer art. 1195
(5 DIN modules)

1

Video central power supply
art. 4856 (8 DIN modules)

1

Switching device art. 4861
(8 DIN modules)

2

Logicom entrance panels
(see examples on page 10)

2

Electric locks selected from
arts. 1152-57-60-63.

N.B. If each external unit uses more
than 2 nameplate bulbs , add a
transformer art. 1112 (5 DIN modules)
and two conductors to the system to
supply other lights. See variant V5/EA
on page 66.

V5/02E Installation avec deux
postes extérieurs audio-vidéo série
Logicom. Câblage simplifié

Fonctionnement
Le fonctionnement de l'installation est
décrit à la page 44.
L’installation permet en outre la
communication audio-vidéo avec le
poste extérieur demandeur grâce au
commutateur art. 4861.

Réalisation de l'installation
• Réaliser l'installation conformé-

ment aux "Normes générales pour
l'installation", surtout en ce qui
concerne la section des
conducteurs. Voir page 36.

• Pour toute variante, consulter le

chapitre "Variantes sur les
schémas" à la page 66.

• Effectuer l'essai de l'installation tel

qu'il est décrit à la page 39.

Appareils nécessaires:
n

Moniteurs au choix entre les Art.
4600W – 4600W/I – 4601W et
éventuelles boîtes à encastrer.

n

Brides Art. 4606 W

n

Dérivateurs vidéo art. 4835
(4 modules DIN) - 1 par groupe
ou fraction de 4 moniteurs

2

Transformateurs art. 1112
(5 modules DIN)

1

Transformateur art. 1195
(5 modules DIN)

1

Centrale vidéo art. 4856
(8 modules DIN)

1

Commutateur art. 4861
(8 modules DIN)

2

Poste extérieur Logicom
(voir exemples page 10)

2

Gâches au choix art. 1152-57-60-63.

N.B. Si chaque poste extérieur
dispose de plus de 2 lampes pour
éclairer les etiquettes porte-noms ,
ajouter le transformateur art. 1112 (5
modules DIN) et deux conducteurs à
l'installation pour alimenter les lampes
supplémentaires. Voir variante V5/EA
à la page 66.

Advertising