HMC Electronics MDL Series BK Precision DC Electronic Load System Module - Manual (Page 17)

17
System Menu
Press Shift + ⑦ key to enter the System menu.
MENU
INITIALIZE
INITIALIZE DEFAULT SET Resume all configuration to default settings
POWER ON SET
RST (DEFAULT) Set the load’s input state to default at power on
SAV0 Set the load’s input state to SAV0 at power on
BUZZER SET Set up the buzzer state
ON Enable the function
OFF (DEFAULT) Disable the function
LOAD ON KNOB Module knob mode setting
UPDATE (DEF) Real-time update
OLD No update (when turning load ON/OFF, original
value before use of rotary knob will be set)
TRIGGER SOUR. Set up the trigger mode
MANUAL (DEF) Manual trigger
EXTERNAL External signal trigger mode
HOLD Hold trigger mode
BUS Bus trigger mode
TIMER Timer trigger
TRIGGER TIMER Trigger timer setting
TRIGGER TIMER SET Set the time of the trigger timer
COMMUNICATION Select the interface for remote communication
RS232 (DEF)
USBTMC-USB488
GPIB
ETHERNET
RS232 SET
BAUDRATE SET Set up the communication baud rate
4800 (DEFAULT)
9600
19200
38400
57600
115200
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440