HMC Electronics MDL Series BK Precision DC Electronic Load System Module User Manual
Page 26
26
cabinet, please avoid installing the load near the fan, since it may limit air circulation of the load. If
you are installing equipment on top of your electronic load in the cabinet, use a filler panel above
the unit to ensure adequate air circulation.
The MDL Series can be placed in a standard 19-inch rackmount shelf. Rack mount kit IT-E153A is
available for use with mainframe (MDL001) and mainframe extension (MDL002). When mounted,
there is no need to remove the bottom studs.
CAUTION : Do not block the fan exhaust at the rear of the load. When the load is used
on a bench, make sure there is enough space on the front and rear of the equipment
for air circulation.
Figure 7 - MDL001 and MDL002 Outline Diagram
The MDL002 mainframe extension has the same dimensions as the MDL001 mainframe.
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
(800) 482-4440