HMC Electronics MDL Series BK Precision DC Electronic Load System Module - Manual (Page 57)

57
13.
Set second step’s width time. Input value and press Enter key to
confirm.
Step 002 width
= 5S
14.
Set parameters for steps 3 through 5 in the same manner described
above.
15.
Set number of run cycles. Input value and press Enter to confirm.
Repeat Count
= 1
16.
Select memory position to save list file. Input value and press Enter
to confirm.
CH01
Save list file
= 1
17.
Press  key to select <Function Mode> and press Enter. Select
<List> and press Enter to confirm.
Fixed
List
18.
Press Esc key twice to exit menus.
19.
Press On/Off key to turn on the electronic load’s input.
CH01 CC ON
Vdc = 0.0000V
Adc = 0.0000A
Wdc = 0.00W
20.
Press Trig key to trigger List mode operation.
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440