INFICON LDS3000 Modular Leak Detector Interface description - Manual (Page 6)

6 Interface Protocols
1 Interface Protocols
1.1 Serial Interface Protocols
With the IO1000 module you can communicate with the LDS3000 via the following
serial interface protocols:
• ASCII Protocol (enabled by default)
• LD Protocol
If you want to replace a LDS1000 or LDS2010 with a LDS3000 you can also use
• Binary Interface Protocol
• LDS1000 Compatibility Protocol
The serial interface protocol can be selected via DIP switch at the IO module IO1000
or via control unit CU1000. Please refere to appropriate documentation.
1.2 Field Bus Protocols
With the Bus module BM1000 you can communicate with the LDS3000 via the
following field bus protocols:
• PROFIBUS-DP Protocol
• Other fieldbus protocols (PROFINET, DeviceNet, EtherNet/IP, MODBUS RTU,
MODBUS TCP, CANopen, EtherCAT, CC-Link, ControlNet) may be available on
request. Please contact your local INFICON representative.
Do not use the last two protocols for new developments. They have limited
functional range and may not be supported in future.