7 s16 switch settings, 8 dac range settings – INFICON TM-400 Thin Film Deposition Monitor User Manual
Page 41
4 - 7
IP
N 17
88
0
0 Re
v.
B
TM-350/400 Operating Manual
4.3.7 S16 Switch Settings
4.3.8 DAC Range Settings
For more detail information on the DAC, see
.
Table 4-3 S16 Switch Settings
Switch #
State
Description
1
ON/OFF DAC Rate Range Select Bit 0 (Refer to DAC Table below).
2
ON/OFF DAC Thickness Range Select Bit 0 (Refer to DAC Table below).
3
ON
Ignores all negative rate or thickness readings and displays
these values as 0.
OFF
Disables above feature.
4
ON
The TM-400 can switch to a failed back-up sensor, and still
display an O-fail error.
OFF
Disables above feature
5
ON/OFF DAC Rate range Select Bit 1 (Refer to DAC Table below).
6
ON/OFF DAC Thickness range Select Bit 1 (Refer to DAC Table below).
7
ON
Allows the source shutter to pulse close for 1 second once the
thickness endpoint is reached.
OFF
Disables above feature and uses standard operation
8
ON
Disable Sensor #2
OFF
Normal dual sensor operation
Table 4-4 DAC Range Settings
DAC Range
Thickness
Rate
Range
Bit 1
(Switch 36)
Bit 0
(Switch #2)
Bit 1
(Switch #5)
Bit 0
(Switch #1)
OFF
OFF
OFF
OFF
99
OFF
ON
OFF
ON
999
ON
OFF
ON
OFF
5000
ON
ON
ON
ON
9999