INFICON TM-400 Thin Film Deposition Monitor - Manual (Page 16)

2 - 2
IP
N 17
88
0
0 Re
v.
B
TM-350/400 Operating Manual
2.2.3 Parameter Display
The Film Density, Tooling Factor, and Acoustic Impedance parameters are instantly
viewable on demand for quick reference at any time.
2.2.4 High Resolution Autoranged Display
All parameter displays and Rate and Thickness displays are fully auto ranged. Rate
measurements are displayed to resolution of 0.1 Å/sec, and thickness to a
resolution of 1 Å.
2.2.5 Long-Term Parameter Storage
Parameters entered into the Monitor are maintained in memory for a period of at
least five years without power. Short-term power loss will not require parameters to
be re-entered.
2.2.6 Multiple Computer Interfaces
Supports RS-232 (standard), RS-485, or IEEE-485.
2.2.7 Compact Case
Available in either a bench top model or with a standard (19”) rack mounting kit
2.2.8 DAC Output
Dual Digital-to-Analog converter outputs provide data for recording Rate and
Thickness data, simultaneously.
2.2.9 Multiple Crystal Frequencies
The Monitor is designed to accept 2.5, 3, 5, 6, 9, & 10 MHz sensor crystals and
nominal AC line voltages of 100 through 120 or 220 through 240 V(ac) at
50 to 60 Hz.
2.2.10 Built In Test
The Monitor incorporates built in test functions to guarantee its operational integrity
and to aid in fault isolation in the event of an internal failure.