INFICON Stripe CDG045Dhs 0.01 ... 1000Torr / mbar, new 10mTorr - Manual (Page 29)

tina84e1 (2014-07) 29
Low Trip Point
(default)
If the pressure in the vacuum system is lower than the setpoint,
the corresponding LED (<SP1> or <SP2>) is lit solid and the
corresponding relay is closed.
Measurement signal
(pressure p)
Time t
Off On
Hysteresis
(1% F.S.)
Off
Threshold value
Reset value
Setpoint
High Trip Point
If the pressure in the vacuum system is higher than the setpoint,
the corresponding LED (<SP1> or <SP2>) is lit solid and the
corresponding relay is closed.
Measurement signal
(pressure p)
Time t
Off On
Hysteresis
(1% F.S.)
Off
Threshold value
Setpoint
Reset value