JUMO 709062 TYA 202 - Three-Phase Power Controller Operating Manual - Manual (Page 34)

3 Electrical connection
32 2012-12-31/00561073 [SCR power switch TYA202]
3.2.3 Type 709062/X-0X-100-XXX-XXX-XX-25X
Devices with a load current of 100 A are equipped with plug-in screw terminals
in the control section and cable lugs in the power section.
Terminal Version Conductor cross-
section Maximum
tightening torque
X2_1 and X2_2 Slotted screws, blade width 2 mm 0.2 to 1.5 mm
2
0.25 Nm
X3 Slotted screws, blade width 3 mm 0.5 to 2.5 mm
2
0.5 Nm
U2, U1 M6 hexagon screws, width across flats
10 mm 16 to 50 mm
2
5 Nm
For applications according to UL, only 75 °C copper conductors may be used!
N/L2, V, L1 Slotted screws,
blade width 3 mm 0.5 to 4 mm
2
or
(0.5 to 2.5 mm
2
with end sleeve)
(for UL AWG 20-12)
0.5 Nm
Ground terminal PE M6 setscrew with hexagon nut
Width across flats 10 mm Cable lug
hole: 6 mm 5 Nm