JUMO 709061 TYA 201 - Single-Phase Power Controller Operating Manual - Manual (Page 66)

5 Configuration
64 2012-12-01/00561071 [SCR Power Controller TYA201]
External switch-off,
display lighting Switched off No external switch-off, i.e. the background lighting
behaves according to the configuration in Chapter 5.1.1
Binary input1 Switch-off is controlled by binary input1
Binary input2 Switch-off is controlled by binary input2
Ext. binary input1 Switch-off is controlled via an interface
Ext. binary input2 Switch-off is controlled via an interface
Control direction
inhibit input The firing-pulse inhibit can be triggered when the switching
contact is closed or open.
v Chapter 3.3 "Connection diagram"
Open, load ON Ex works:
Inhibit input open, power controller supplies power.
Inhibit input closed, power controller does not supply power.
Open, load OFF
Control direction,
binary input1 Open, inactive The function for binary input1 can be triggered when the
switching contact is open or closed.
Open, active
Control direction,
binary input2 Open, inactive The function for binary input2 can be triggered when the
switching contact is open or closed.
Open, active
Value/settings Description
k / bold = factory setting
7
8
3,3V
10k W