JUMO 709061 TYA 201 - Single-Phase Power Controller Operating Manual - Manual (Page 75)

2012-12-01/00561071 [SCR Power Controller TYA201] 73
6 Special device functions
If the teach-in is being performed for the first time, the message "Teach-in load
monitoring" appears in the bottom line of the display.
6.2.3 Performing teach-in in manual mode
The power controller is in the "Measured value overview" level.
h Press the
key twice to return to manual mode.
If the teach-in is being performed for the first time, the message "Teach-in load
monitoring" now appears in the bottom line of the display.
h Press the
key and the following message will appear:
h Press the
key to apply the current load state as the OK status.
A change in the load (load error) will be evaluated by the device on the basis of
this status.
Repeating
teach-in The teach-in can be repeated any number of times in manual mode.
h Press the
key and the following message will appear:
h Press the
key to apply the current load state as the OK status.