14 output behavior – JUMO 701150 14597 safetyM STB/STW - Safety Temperature Limiter and Safety Temperature Monitor Operating Manual User Manual
Page 114
14 Output behavior
114
Differential – Alarm inactive again (STB function)
Inactive
Unlocking possible
Pre-alarm moni-
toring active
v
Chapter
7.3.4
Scaled analog signal is
being output
v
Chapter 7.5
After acknowledgement probe break – Alarm (STB
function)
Monitoring of the limit
value active
v
Chapter 7.3.2
Internal errors
Internal errors diagnostic channel active
Inactive
Pre-alarm moni-
toring active
v
Chapter
7.3.4
Scaled analog signal is
being output
v
Chapter 7.5
Internal errors diagnostic channel inactive again
Monitoring of the limit
value active
v
Chapter 7.3.2
Internal errors safety channel active (STB)
Inactive
Active
Error signal is being out-
put
v
Chapter 7.5.5
Internal errors safety channel inactive again (STB)
Inactive
Unlocking possible
Pre-alarm moni-
toring active
v
Chapter
7.3.4
Scaled analog signal is
being output
v
Chapter 7.5
Internal
errors
safety
channel
after
acknowledgement (STB)
Monitoring of the limit
value active
v
Chapter 7.3.2
Operating status
Relay output alarm
Relay output
pre-alarm KV
Analog output