JUMO 701150 14597 safetyM STB/STW - Safety Temperature Limiter and Safety Temperature Monitor Operating Manual - Manual (Page 51)

6 Safety Manual 51 2014-05-01
6.11 Connection possibilities of the sensors (PL)
The JUMO safetyM STB/STW 701150 evaluation device structure is basically identical.
Various possibilities to connect the sensors are available. These possibilities are listed in the following table along with the
achievable PL level:
SRESW Safety-Related Embedded Software 4.6.2
SRP Safety-Related Part General
SRP/CS S afety-Related Part of (a) Control System(s) 3.1.1
Sub-PL/Sub-SIL PL or SIL at subsystem level. A subsystem a system that – based on a subtask –
already adequately performs a safety function (for example, an input module that
reliably records the inputs).
TE Test facilities 6.2
T M Functional life 3.1.28
T M Functional life, designated Mission Time
T 10d - value Reference value for a preventative exchange (10 % of the B10d value). At this val-
ue, a dangerous failure has already occurred for approx. 63 % of all components.
In this case, the standard DIN EN ISO 13849-1:12006 recommends replacement.
Formula symbol or
abbreviation Description Definition
or location