6 display/operation, Display/operation, 1 language 7.6.2 unit 7.6.3 decimal place – JUMO 701150 14597 safetyM STB/STW - Safety Temperature Limiter and Safety Temperature Monitor Operating Manual User Manual
Page 85: 4 normal display, 7 configuration level
7 Configuration level
85
7.6
Display/operation
Parameter
Comment
Value range
(factory-setting in bold)
7.6.1
Language
German
German
, English, French
English
French
7.6.2
Unit
Here a unit for the measured value can be assigned.
°C
, °F, %, text
°
C
°F
%
Text:
Via the setup program, 2 characters can be entered
here for another unit, e.g. Pa (Pascal).
7.6.3
Decimal place
No decimal place
No decimal place,
One decimal place
One decimal place
7.6.4
Normal display
This sets the view that appears after the voltage supply
is switched on.
v
Main measured value
,
measured values, limit
value, pre-alarm, difference
Main measured value
Measured values
Limit value
Pre-alarm
Difference
A
When the measurement unit changes
to °F, the measured value is convert-
ed.
All other values referring to the mea-
sured value (e.g. limit value) remain in
their value!