JUMO 701150 14597 safetyM STB/STW - Safety Temperature Limiter and Safety Temperature Monitor Operating Manual - Manual (Page 20)

3 Installation 2014-05-01 20
3.5 Electrical isolation
3.6 Use of the setup interface
- The setup interface USB is only designed for service use for a limited period, e.g. for transmitting setup data and during
commissioning.
- It is not suitable for operation in a fixed installation for an unlimited period as the monitoring function is switched off during
data transmission with the setup program.
(1) Analog inputs
(3) Binary input
(5) Setup interface
(6) Display
(7) Analog output
(8) Power supply
(2) Relay output "Alarm"
(4) Relay output "Pre-alarm"
»
3700 V AC
»
3700 V AC
(1) (2)
(4)
(3)
(5)
(8)
(6)
(7)
»
3700 V AC
50 V DC
»