Leica Biosystems CM1520 - Manual (Page 17)

17 Leica CM1520 – Cryostat
When the instrument is delivered, check the tilt indicators on the
packaging.
If the arrowhead is blue, the shipment was transported laying flat,
was tilted at too great an angle or fell over during transport.
Note this on the shipping documents and check the shipment for pos-
sible damage.
Fig. 4
4.2 Unpacking instructions for the CM1520 cryostat
4. Setting up the Instrument
• Lift the outer carton ring (2) upwards and out.
• Remove the foam transport anchors (3), and then pull the dust
cover from the instrument.
• Remove the accessory crate (4).
Caution when
removing the
metal strips!
There is a risk
of injury when
opening them
(the strip has
s h a r p e d g e s
and is under
tension)!
To remove the metal strips (1), you
need metal shears and suitable
gloves. Stand next to the crate and
cut the strips at the location shown
(see Fig. 5 "  ").


Fig. 5
1
2
3 3
4
5
Fig. 6