Leica Biosystems CM1520 - Manual (Page 19)

19 Leica CM1520 – Cryostat
• When transporting the instrument on wheels,
(2) grip the cabinet only at the marked loca-
tions ( ).
• To ensure a secure upright position at its in-
tended location, the instrument must be adjusted.
To do so, unscrew both adjusting feet (1) using
the provided open-end wrench (No. 13).
When subsequently transporting the instru-
ment any further on wheels, screw them back
in all the way.
1
1
2
2
2 (not visible)
Fig. 9
Transport to the site
• First, check if the location meets the conditions specified in 'Installation
site requirements'.
• Transport the instrument to the desired location.
• Observe the following:
4. Setting up the Instrument
The instrument must be transported in an upright position or slightly
tilted (max. 30°)!
When tilting the instrument 2 people must counterbalance from the
front side to prevent the instrument from falling down and causing
severe injury, as well as possible severe damage to the instrument
and the surrounding area!