Leica Biosystems CM1520 - Manual (Page 62)

62 Instructions for Use V1.3 – 10/2012
9.3.2 Replacing the fuses
9. Cleaning, Disinfection, Maintenance
On the back of the instrument there is a fuse box with 4 fuses:
• Unscrew the fuse cap with a screwdriver.
• Remove both fuse cap and fuse.
• Insert the defined fuse into the sleeve, then use the screw-
driver to screw the sleeve back in as far as it will go.
Fuse Protection Type
F1 Display T 0.25 A
F2 Coarse feed T 1.6 A
F3 Processor board supply T 1.0 A
F4 Peltier element T 6.25 A
Fig. 56
Turn the instrument off and disconnect the power plug before replacing the fuses.
Use only the fuse types specified in Chapter " 3. Technical Data ".
Failure to comply with this can cause severe damage to the instrument and its surroundings
and a risk of fatal injury!